STEP 1: Clean the screen

Wipe away any small dust particles from the screen using the anti-static cloth. Use it to remove the last traces of dust from the screen. Is there a sticker included in the packaging?

If so, use it to dab away any remaining traces. Nothing included? Adhesive tape works well for lifting the last bits of dust from the screen.

STEP 2: Align the screen protector

Remove the bottom layer of the screen protector. Use the cut-outs on the screen protector, such as those for the home button or speaker, to line it up perfectly. Then place it on a small section of the screen with the adhesive side facing down. If it's not quite right, you can try again once more.

STEP 3: Apply the screen protector

The screen protector usually adheres to the screen on its own; simply let it fall into place. Not quite working? Run a finger along the centre of the screen to help the screen protector bond. Use the cloth provided or a credit card to push any large air bubbles out towards the edges of the screen.

STEP 4: Remove air bubbles

The last few air bubbles are often the trickiest to shift. Can't manage them with the cloth or your credit card? Lift the screen protector slightly at a corner and smooth it firmly back down onto the screen in one single motion. Don't do this too often, though.